Nissan Juke MR16DDT P0014 diagnosis should come before a VVT gear order. The code points the workshop towards an exhaust valve-timing control concern, but it does not identify a single replacement part by itself. Australian owners searching for 13025-1KC2C need a second, separate confirmation: does that exact product match the component the workshop has actually diagnosed and specified for the vehicle?
RunningRoo has a 13025-1KC2C PULLEY ASSY-VALVE TIMING CONTROL NISSAN MR16DDT MR20DD FOR JUKE and a corresponding matching RunningRoo eBay listing. They are real product listings, not a promise that this gear cures P0014. Confirm the VIN, complete engine code, required camshaft position, OE number and professional diagnosis before purchase. RunningRoo is Australian-operated in Blackburn, Melbourne, with friendly support, local pickup by appointment and fast dispatch arrangements for confirmed stock. Call 0425 890 125 when the workshop has identified the required component.

Read the code as a diagnostic starting point
A scan result is useful because it directs investigation. It becomes less useful when its description is treated as a parts catalogue. Ask the workshop for the complete report and the exact fault status. Retain any earlier report if the codes have since been cleared. A screenshot containing only the headline code can leave out information needed to understand the technician’s decision.
Describe the vehicle’s behaviour separately: warning lamp, uneven operation, reduced performance or another concern. State when it occurs and whether recent work preceded it. Do not decide in advance that every symptom shares one cause. The workshop should connect the observations and test results, then explain which repair follows from the evidence.
If the vehicle is behaving abnormally, ask the technician whether it should be driven or recovered. This article does not provide a universal safe-driving distance for P0014. The appropriate advice depends on the actual condition, associated symptoms and diagnostic findings. A parts listing cannot answer that operational question.
What Nissan’s diagnostic information says
The Nissan 2014 Juke EC manual’s MR16DDT P0014 section describes a difference between target and actual exhaust timing control. It gives priority to P0078 or P1078 diagnosis when those codes accompany P0014. Its possible-cause list includes sensing, control, timing-chain installation and contamination-related paths, rather than naming one gear as the inevitable cause. Read the archived manufacturer Nissan 2014 Juke EC manual, MR16DDT P0014 diagnostic section (archived original). Use the current manual for the actual vehicle; this summary is not a complete diagnostic sequence and does not establish that 13025-1KC2C is the repair for any of those paths.
This manufacturer approach is the reason to keep diagnosis and product selection separate. The workshop first determines what is wrong. Only then should the supplier compare the required component with a specific listing. Reversing those steps can turn an available product into an assumed diagnosis.
Preserve the companion-code information
If other faults are recorded, send the full report to the workshop instead of selecting only the code that appears most relevant to a product search. The technician may need to address one finding before evaluating another. Owners should not clear, reorder or summarise the report in a way that removes this context.
Ask the workshop which findings it has resolved and which remain under assessment. A statement such as “further testing required before parts selection” is a valid outcome. It is better than a confident gear order based on incomplete information. If the report is from another workshop, provide its date and any work carried out since then.
The supplier does not need to reinterpret the whole diagnostic process. It needs the confirmed parts requirement, vehicle identity and references. Keeping those roles distinct makes the enquiry more efficient and prevents a retail conversation from becoming an unsupported remote diagnosis.
Confirm intake or exhaust before discussing the part number
The distinction between camshaft positions must remain explicit. Do not assume that any listing described as “VVT gear for Juke” refers to the side involved in a P0014 assessment. Ask the installer to identify the required position and the exact reference from vehicle-specific parts information. If the listing does not clearly answer that question, obtain confirmation before ordering.
The product linked here is identified by 13025-1KC2C and a broad engine/application description. This article does not certify it as an exhaust-side P0014 replacement. It is included as a relevant RunningRoo VVT product for a confirmed fitment enquiry. If the workshop requires a different component or reference, this listing should not be substituted merely because it mentions MR16DDT.
Readable markings on the removed component can support the enquiry, but the workshop should establish the identity before relying on visual similarity. Two timing-control components can look broadly alike while serving different applications or positions. A photograph is most useful when accompanied by the VIN, engine code, required side and reference number.
A diagnosis-to-purchase checklist
| Question | Evidence to request | Decision it supports |
|---|---|---|
| What is installed? | VIN and complete engine identification | Selects the correct vehicle-specific information |
| What was recorded? | Full scan report and fault status | Preserves companion-code context |
| What has been established? | Written diagnostic findings | Separates a confirmed cause from a possible cause |
| Which component is needed? | Exact description and camshaft position | Avoids ordering a generic VVT item |
| Which reference applies? | OE number or confirmed replacement reference | Allows comparison with 13025-1KC2C |
| What is the product condition? | Current listing details and clarification | Avoids assuming that every offering is new |
| What is required to finish? | Installer’s complete parts and verification list | Matches the purchase to the approved repair |
Use the checklist to organise information, not to perform the diagnostic tests yourself. The workshop should follow the appropriate manufacturer procedure, including its prerequisites and limits. An isolated online test value or a borrowed procedure from another engine is not enough to establish the repair.
Product condition deserves its own check
At the preparation check, the eBay offer was labelled Used, and the RunningRoo website described a tested component. Do not silently describe it as brand new in an enquiry or repair estimate. Read the current website and eBay condition fields, and ask RunningRoo to clarify any difference between them before purchase. The condition of the offered item is separate from whether its reference suits the vehicle.
Similarly, an OE-style reference does not by itself establish genuine Nissan manufacture. Ask about the actual product identity and the applicable terms. Keep those answers with the order confirmation so that the installer and owner have the same understanding of what is being supplied.
If the workshop requires a specific condition, revision or source, state that requirement before ordering. Do not assume that a broad listing title meets an unstated workshop condition. A clear enquiry may reveal that a different product is needed, which is preferable to discovering the mismatch after the booking begins.
Why recent repair history is relevant
Tell the technician about recent timing, camshaft, oil-system or related engine work, even if it was performed elsewhere. Provide the invoice rather than relying on memory. This does not imply that the earlier work caused the fault; it gives the workshop a factual sequence to consider when choosing the next checks.
If the complaint began before the earlier repair, say so. If it appeared afterwards, record how soon and under what circumstances. The distinction can prevent an inaccurate narrative from forming around the newest part. Keep observations and conclusions separate until the technician has assessed the evidence.
When the owner supplied parts for earlier work, retain both the supplier receipt and installation invoice. A purchase record shows what was supplied, while the workshop record shows what was fitted. Having both helps identify the relevant references without assuming that every item purchased was installed.
Illustrative outcomes from a P0014 enquiry
One possible outcome is that the workshop identifies an electrical or sensing concern and specifies a component other than the advertised gear. In that case, the correct purchasing decision is to follow the confirmed reference, not to buy 13025-1KC2C because it appeared in a related search. The product page can be relevant to the broader subject without being the required repair.
Another possible outcome is that the workshop needs further mechanical assessment before identifying parts. The owner should ask what remains unresolved and when a final list can be provided. A provisional price enquiry is reasonable, but it should stay provisional. Availability does not remove the need to establish compatibility and necessity.
A third outcome is a confirmed requirement for a component matching the live listing. The 13025-1KC2C PULLEY ASSY-VALVE TIMING CONTROL NISSAN MR16DDT MR20DD FOR JUKE and matching RunningRoo eBay listing then become useful purchasing options, subject to condition and fitment confirmation. These examples illustrate decision paths only; they are not customer case studies, repair guarantees or evidence that any particular failure is common.
Make the RunningRoo enquiry specific
A useful message identifies the Juke’s VIN, engine code, required camshaft position and the workshop’s reference. Include the exact product link and ask whether it matches the approved requirement. If the technician has not confirmed the side or reference, explain that the enquiry is preliminary rather than asking the supplier to make that diagnosis.
Call 0425 890 125 for friendly support with the listing, stock and supply arrangements. RunningRoo’s Australian-operated team can help clarify what is offered and how it can be supplied. The workshop remains responsible for determining the fault and the installation procedure. This keeps both the technical advice and the purchase grounded in information each party can verify.
For a broader product-identification discussion, see Nissan Juke 1.6 Turbo VVT Gear 13025-1KC2C: Fitment and Buying Checks. That earlier guide addresses the buying checks around 13025-1KC2C. This article adds the specific caution that a P0014 search must not be converted into a gear order without a documented diagnosis and position check.
Arrange supply without creating avoidable downtime
Melbourne customers can arrange Blackburn pickup by appointment after stock is confirmed. RunningRoo can also discuss fast dispatch and delivery estimates for other Australian locations. Allow time for the workshop to inspect the received item before installation, especially where a reference or condition question has required clarification.
Keep the package labels and order confirmation available. If the received item differs from the agreed description, contact the supplier before fitting and provide clear photographs of the relevant markings. Do not modify or install a questionable part simply because the vehicle is already booked in. Resolve the discrepancy with the installer and supplier first.
If the scope changes during diagnosis, update the order plan rather than forcing the original purchase to fit the new conclusion. A well-managed repair can include a pause for clarification. The goal is a correct, documented result, not a rushed installation of the first product found online.
Verification and the final record
Ask the workshop to record the components fitted and the checks used to assess the original complaint. A cleared code alone is not a complete explanation of a repair outcome. The useful record connects the diagnosed cause, the work performed and the verification, with any limitations or follow-up instructions stated clearly.
If the warning returns, provide the previous report and a new symptom description. Do not assume that the same code necessarily means the same component has failed again. The technician should assess the current evidence. Retained references and invoices make that process more efficient and support any legitimate supplied-part enquiry.
Frequently asked questions
Is 13025-1KC2C a guaranteed cure for P0014?
No. This article makes no such claim. P0014 requires diagnosis, and the required component, position and reference must be established independently. Only order this listing if the workshop’s confirmed requirement matches it.
Why does the full code report matter?
Companion faults can affect the diagnostic sequence. Retaining the complete report prevents important context from being lost. Ask the workshop to interpret it using the applicable Nissan information rather than treating each code as a separate parts order.
Can I choose a gear by the Juke model name alone?
No. Confirm VIN, engine code, camshaft position and OE reference. The model name and a similar product photograph are not sufficient evidence of compatibility. Tell the supplier about any replacement engine or relevant modification.
Is the listed product definitely brand new?
Do not assume that. Review the current condition wording on both sales channels and clarify any inconsistency with RunningRoo before ordering. Condition, manufacturer identity and compatibility are separate questions and should all be clear.
Can RunningRoo supply locally in Melbourne?
Contact RunningRoo on 0425 890 125 to confirm availability and arrange Blackburn pickup by appointment. Fast dispatch can be discussed for other Australian destinations. Compare the 13025-1KC2C PULLEY ASSY-VALVE TIMING CONTROL NISSAN MR16DDT MR20DD FOR JUKE and matching RunningRoo eBay listing only after the required reference and condition are confirmed.
Related RunningRoo video
Watch Variable Valve Timing Explained for general variable-valve-timing background. It is not a Juke P0014 diagnostic procedure and does not prove that the advertised gear is the source of the fault.
The next step is a confirmed workshop parts requirement. With that information, RunningRoo can assist with a precise product comparison, friendly Australian support, Melbourne local pickup and stock-dependent fast dispatch. A careful position and reference check is more useful than ordering from the fault-code wording alone.

