A Hyundai Elantra MD front hub and bearing enquiry can become confusing when the listing says “ABS: No” while also saying the ABS ring is on the CV shaft. Those fields need to be read together and checked against the actual vehicle. They should not be simplified into a claim that the car has no ABS or that any visually similar front bearing will fit.
RunningRoo currently lists a front wheel bearing hub for selected Elantra MD 1.8L applications, alongside other Hyundai and Kia application leads. The description provides several dimensions and says one full hub assembly, while the photograph shows a hub flange and a separate-looking bearing. Review Hyundai Elantra MD Front Hub and Bearing Australia at RunningRoo and matching RunningRoo eBay listing, then confirm the delivered assembly state and wheel-speed arrangement with the supplier and your workshop.

Call 0425 890 125 with the VIN, engine code, OE identification and mechanic's requested parts. RunningRoo offers friendly Australian-operated support, Melbourne local pickup in Blackburn by appointment and fast dispatch for confirmed available stock. This guide concentrates on the Elantra MD front purchase and the listing's specific ABS and package wording, rather than treating all Hyundai hub assemblies as interchangeable.
Keep the Elantra MD application separate from a broad title
The seller's application information includes Elantra MD 1.8L G4NB leads within a stated year range, as well as Veloster and Cerato applications. That broad retail grouping is not an independent confirmation for every model, engine or production date mentioned. The buyer should provide the actual VIN, build details and engine code and have the required part identified for that car.
Do not approve a part because another Hyundai or Kia appears to use a similar hub. The supplier's application table is a starting point for a conversation, while the vehicle-specific parts requirement is the comparison that needs to be satisfied. If a workshop gives you a reference that is not written in the offer, ask RunningRoo to compare it explicitly rather than assuming the title covers it.
The Elantra name itself also needs context. Record MD in the enquiry and confirm that the required position is front. A rear unit or a part for another generation is a separate purchase. Keep generation, axle position and vehicle identity together in the order notes so that a broad search term does not become an incomplete specification.
Read the two ABS fields as seller data
The current description states “ABS: No” and “ABS Ring on CV Shaft: Yes”. These are product-listing fields, not a diagnosis or a statement that the vehicle lacks an anti-lock braking system. Read them as information requiring comparison with the actual wheel-end arrangement. Ask the workshop what design is fitted and what the replacement part must provide.
Do not infer that a separate sensor, cable or ring is included simply because ABS is mentioned. Likewise, do not reject the part solely because one field says No without understanding what that field describes. The supplier should clarify the offered component and its contents; the workshop should establish whether that configuration suits the vehicle.
This distinction prevents two common purchasing errors: treating a product's attribute as a whole-vehicle specification, and treating a system name as a packing-list item. Neither the acronym ABS nor a picture of a bearing is enough to resolve the exact arrangement. Keep the written confirmation with the order so the workshop can compare the delivered parts with the approved specification.
Seller dimensions are comparison data, not a complete fitment certificate
The listing gives five mounting holes, a 139 mm outer diameter, a 114.3 mm pitch-circle diameter, M12 × 1.5 thread information, 27 splines and a 42 mm bearing diameter. These are seller-provided fields, not measurements independently certified here against Hyundai's specifications. Ask the supplier to clarify the feature being measured where a label could be ambiguous, especially the generic “bearing diameter” entry.
A match on one dimension does not establish that all relevant interfaces and the wheel-speed arrangement are correct. Use the dimensions as supporting information alongside the VIN-based requirement, original identification and workshop comparison. Do not turn a matching bolt pattern into a universal application claim for every car with that pattern.
If the workshop finds a discrepancy, resolve it before installation. A photograph or a casual owner measurement should not overrule the required specification. The correct response is to compare the actual features and documentation, not to modify a supplied component until it appears to fit. Preserve the part's supplied condition while the supplier and repairer clarify the issue.
| Listing field | Seller-stated value | How to use it responsibly |
|---|---|---|
| ABS | No | Clarify the product attribute; do not read it as the car having no ABS |
| ABS ring location | On CV shaft: Yes | Compare with the actual vehicle arrangement |
| Mounting holes | Five | Supporting comparison, not complete compatibility proof |
| Outer diameter and PCD | 139 mm and 114.3 mm | Confirm the relevant features with the workshop |
| Thread and splines | M12 × 1.5 and 27 | Check against the identified vehicle requirement |
| Bearing diameter | 42 mm | Ask which diameter the listing means before relying on it |
| Written quantity | One full hub assembly | Confirm contents and whether the bearing is preassembled |
Resolve the photograph and assembly wording before booking
The written description says one full hub assembly, while the product photograph shows a separate-looking hub flange and bearing. Those two pieces of evidence leave an important practical question unresolved: does the current package arrive fitted together, or does the workshop receive components requiring assembly? Ask the supplier to answer explicitly and have the mechanic confirm that the supplied arrangement suits its repair plan.
Avoid treating the word “full” as a promise that every related item is included. It may describe the main product without establishing seals, retaining hardware, fasteners or other materials needed on the car. Request a component-by-component packing list if the workshop needs those details. A clear written answer is more useful than interpreting a promotional image.
Quantity also needs to remain separate from assembly state. One assembly is not automatically a pair for both front corners. If the mechanic recommends more than one corner, establish the correct parts and quantities for each. The photograph should not be used to count multiple hub views as multiple delivered units.
Technical background from NSK
NSK's NSK wheel bearing and magnetic encoder guidance addresses bearing replacement where a magnetic encoder is present, including careful handling and the correct encoder relationship to the sensor for that design. It reinforces the need to identify the actual bearing arrangement before fitting. This general manufacturer guidance does not override this seller's CV-shaft-ring field, prove that the offered Elantra bearing has an encoder or provide a Hyundai-specific fitting procedure.
Ask the workshop which manufacturer service information and supplied-part instructions it will use. The answer should relate to the actual vehicle and delivered design, not a generic wheel-bearing video. This article does not supply press-tool dimensions, tightening values or a sequence for assembling the photographed components. Those details must be selected by the repairer from the applicable information.
The practical buying lesson is to resolve design and assembly scope first. A well-identified package allows the workshop to plan the correct work and confirm any extra items. An ambiguous package can leave both owner and mechanic making assumptions about tooling, sensors or hardware after the vehicle is already dismantled.
Make the diagnostic request as precise as the parts request
If the reason for the enquiry is a noise, vibration or other wheel-end concern, describe when it occurs and any recent work on the car. Let the workshop establish the cause and the affected corner. The owner should not use the presence of an available front-hub listing as evidence that the front hub must be responsible.
Ask for the mechanic's confirmed recommendation and any checks still outstanding. A provisional suspicion and an approved replacement instruction should be recorded differently. If the workshop has identified a specific reference, keep it with the enquiry and ask the supplier to compare the offer against that requirement. Do not replace the professional assessment with a claim that a generic symptom always means a bearing failure.
Where the vehicle's condition raises concerns about continued use, ask the repairer how to arrange transport and timing. This buying guide is not a driving assessment or a set of home diagnostic tests. Its purpose is to help you order the correct confirmed component once the repair need has been established.
Compare purchase routes and the complete repair scope
Use Hyundai Elantra MD Front Hub and Bearing Australia at RunningRoo and matching RunningRoo eBay listing to compare the current offer on the channel you prefer. Read the actual contents, quantity and terms rather than assuming two listings with similar titles are identical. If the supplier answers the preassembly question, keep that response with the order and forward it to the workshop before labour is booked.
Ask the mechanic to identify separately supplied hardware and consumables. The retail offer does not determine whether existing fasteners can be reused or which additional pieces the applicable procedure requires. A written list should show what RunningRoo will supply, what the workshop will supply and what remains conditional on inspection.
A useful quotation also separates diagnosis, parts, labour and final checks. There is no meaningful universal installed cost for every Elantra MD and every package arrangement. Obtain a vehicle-specific quote that reflects whether the delivered bearing and hub are separate or preassembled and what the workshop has found on the car.
Australian supply and Melbourne pickup arrangements
RunningRoo's Blackburn location offers a local option for Melbourne owners and workshops, with pickup by appointment. Confirm stock, fitment and package details before arranging collection. If another person is collecting, provide the order reference and agreed handover information. The convenience of local pickup should support an accurate purchase, not replace the unresolved ABS or preassembly check.
For delivery elsewhere in Australia, confirm the postcode and current dispatch arrangements. Fast dispatch applies to confirmed available stock, while arrival timing depends on the selected service and destination. Allow time for the workshop to inspect the received package before scheduling work that depends on it. Keep tracking information and the purchase correspondence together.
Call 0425 890 125 for friendly Australian-operated support. A complete enquiry should include VIN, G4NB or other actual engine code, MD identification, front position, required OE information and the specific package questions. Sending all of that at once gives the supplier a better starting point than a message asking only for an Elantra bearing.
Receiving and handover checks
Compare the delivered quantity, markings and assembly state with the written confirmation. If the package arrives as separate components when a fitted assembly was agreed, clarify the discrepancy before installation. Retain labels and packaging while the workshop checks compatibility. Do not discard the evidence needed to resolve an incorrect or incomplete delivery.
The repairer should compare the actual part with the vehicle requirement and the relevant instructions. If a dimensional or design difference appears, obtain an explanation before any modification or fitting attempt. A matched PCD alone does not resolve an unexplained difference elsewhere in the assembly. Keep the part in its supplied condition while the issue is investigated.
After installation, retain the workshop record identifying the repaired corner, supplied parts and completion checks. This makes the history more useful than a generic invoice entry saying “front bearing”. If a future concern develops, the next repairer can see exactly what was replaced and which components remained outside the job.
Frequently asked questions
Does “ABS: No” mean my Elantra cannot have ABS?
No such conclusion follows from that product field. The same listing states that the ABS ring is on the CV shaft. Ask the workshop to identify the actual arrangement and the supplier to clarify the offered component before deciding compatibility.
Are the listed dimensions enough to approve fitment?
No. They are seller-provided comparison data and do not replace VIN, original reference and vehicle-specific parts checks. Confirm what each dimension describes, particularly the generic bearing-diameter field, and have the repairer compare the complete requirement.
Is the bearing already assembled into the hub?
The written wording and separate-looking photograph leave that point unresolved. Obtain explicit confirmation of the current delivered arrangement. The workshop should approve the package before booking labour or assuming that a preassembled unit will arrive.
Does one full hub assembly cover both front wheels?
The stated quantity should not be interpreted as a pair. Confirm the exact package and the number of corners your workshop recommends repairing. Multiple views in a product photograph are not evidence that multiple hubs are supplied.
Can the same listing be used for every Veloster or Cerato?
The broader application leads need their own vehicle-specific verification. This guide focuses on the Elantra MD enquiry and does not certify every application named in the seller's table. Supply the actual VIN, engine identity and required reference for another vehicle.
How do I arrange the correct order?
Review Hyundai Elantra MD Front Hub and Bearing Australia at RunningRoo or matching RunningRoo eBay listing, obtain the fitment and package confirmation, and call 0425 890 125 if assistance is needed. Ask about Melbourne pickup by appointment in Blackburn or fast dispatch for confirmed stock. Retain the written answers for the workshop.
Related guide with a different scope
Wheel Bearing and Hub Assembly Failure: Symptoms and Replacement Guide. This covers a different component, engine or background topic. It is not an interchange claim. The specific buying decision in this article remains tied to its named product and verified vehicle requirement.
Sources and evidence boundaries
NSK wheel bearing and magnetic encoder guidance. Manufacturer information supports only the limited context described above. Retail contents and application leads come from the linked seller offers and are not independent OEM certification. Use the applicable complete service information for the actual vehicle and repair.
Review the RunningRoo product and the corresponding eBay offer, or call 0425 890 125. Contact RunningRoo with VIN, engine code and OE details for friendly Australian-operated support. Ask about Melbourne local pickup in Blackburn by appointment and fast dispatch for confirmed available stock; confirm item-specific fulfilment before booking labour.

