Searching for Holden Commodore bonnet struts in Australia is easy; choosing a pair that matches the actual bonnet and mounting arrangement takes a little more care. RunningRoo has a current offer titled Pair Bonnet Gas Struts for Holden Commodore VZ VT VX VY VU Calais Statesmen. The useful purchasing fact is that the offer is for a pair. The broad model wording still needs to be checked against your vehicle before it becomes a confirmed fitment.
Start with Holden Commodore VT VZ bonnet struts Australia at RunningRoo or the matching RunningRoo eBay listing. RunningRoo provides friendly Australian-operated support, fast dispatch options for confirmed stock and Melbourne local pickup in Blackburn by appointment. Call 0425 890 125 with the model, VIN and the original support details. This guide is about buying the appropriate bonnet-support pair, including the questions to ask when the vehicle has been modified or the old markings cannot be read.

Bonnet supports are application-specific components
Stabilus: gas spring handling explains that gas springs must be matched to their intended application and protected from bending, damage and modification. That guidance is a useful reason to avoid choosing solely by appearance. A part that resembles the old support is not automatically correct for the bonnet's weight, attachment points or movement. Use the original reference and a verified application match, with measurements obtained safely where the supplier needs them.
The manufacturer's Stabilus: universal specification guide identifies extended and compressed dimensions, connection style and force as selection information, and recommends replacing both supports where the application uses a pair. This is general gas-spring guidance, not certification that the RunningRoo pair is manufactured by Stabilus. It also does not supply the missing specifications for this retail offer. Ask RunningRoo to confirm the relevant details instead of borrowing a force rating from another product.
Do not use a generic guide as an instruction to compress an unidentified support by hand or work under an unsupported bonnet. Where measurement or removal is needed, have a competent workshop support the bonnet properly and follow the applicable procedure. The buyer can often provide photographs and original markings without carrying out any dismantling. If the bonnet will not stay safely supported, arrange professional assistance rather than relying on it during an inspection.
Understand the model wording before ordering
The retail title mentions VT, VX, VY, VZ and VU, alongside Calais and Statesmen wording. Keep those distinctions in the enquiry. A customer asking for VY bonnet supports is giving a better starting point than asking only for Commodore gas struts, but the supplier still needs enough information to check the actual application. Do not treat the title as proof that all body styles and related models use an identical pair.
Be specific about which panel you mean. Bonnet supports, boot-lid supports and tailgate supports are different purchasing questions even when a search engine returns them together. If you are ordering for a wagon, explain that the required parts support the bonnet at the front of the vehicle. If you are ordering for a ute, include that detail too. Clear panel identification helps prevent a retailer from answering the wrong request.
Disclose changes to the bonnet or hinge arrangement. An aftermarket bonnet, altered mounting point or previous repair is relevant to an application check. Do not assume a catalogue entry for the original car also covers modified hardware. Ask whether the supplier can confirm suitability for the actual configuration, and let the workshop assess any uncertainty. A stronger-looking replacement is not a substitute for an appropriate specification.
What to collect from the vehicle
Prepare the VIN, build date, model designation and body style. Include the engine code if it is available so the vehicle record is complete, while recognising that engine identity alone does not determine the bonnet support. Record whether the bonnet and mounts are original. A concise set of accurate details makes it easier for RunningRoo to distinguish your request from similar listings for other Commodore generations.
Photograph any readable markings on both existing supports, including the reference and force marking if present. Ask the workshop to obtain measurements only where they are needed and can be taken safely. Photographs of the attachment ends and mounting points can be useful for a product comparison. Do not substitute a measurement from a friend's vehicle or an online image when the actual car has not been checked.
| Detail | What to record | Why it helps the purchase |
|---|---|---|
| Vehicle | VIN, build date, VT/VX/VY/VZ/VU and body style | Narrows the catalogue application |
| Panel | Bonnet, with any non-original panel details | Separates the request from boot or tailgate supports |
| Existing markings | Full reference and any force marking on each support | Provides a specific specification to compare |
| Attachment arrangement | Safe photographs of ends and mounts | Helps the supplier assess the correct configuration |
| Measurements if requested | Workshop-confirmed dimensions and measuring points | Avoids unreliable estimates from photographs |
| Quantity | Confirm two bonnet supports in the chosen offer | Aligns the package with a pair replacement |
A pair purchase should be a complete comparison
The RunningRoo title explicitly offers a pair, which is useful when comparing with listings priced for one support. Confirm that the current checkout quantity of one means one pair, and ask whether any additional clips or fittings are included. Do not infer a complete fitting kit from the photograph. If the installer expects to renew another item, establish whether it is supplied or must be sourced separately.
There is no detailed written dimension or force table in the website description checked for this article. That is a real information gap, not an invitation to publish an invented specification. The appropriate next step is a product enquiry using the original reference and vehicle details. If the workshop needs exact dimensions before agreeing to fit the parts, obtain those details before placing the order rather than hoping they match on arrival.
Compare Holden Commodore VT VZ bonnet struts Australia at RunningRoo and the matching RunningRoo eBay listing on the same basis: the pair, the confirmed application, the included hardware and the current fulfilment terms. A cheaper headline price may describe a single support or a different panel. A more expensive listing is not automatically better either. The decision should follow a clear specification and a supplier response that addresses your actual car.
Describe the complaint without diagnosing by age
Tell the workshop what you have observed: whether the bonnet fails to remain supported, whether it needs unusual effort to move, or whether there is visible damage around a mounting point. Do not turn those observations into an automatic instruction to buy a stronger pair. Ask for the bonnet, supports and mounting arrangement to be assessed as a system before the replacement specification is settled.
The vehicle's age is useful context but not a force rating or a repair diagnosis. A car that has received body repairs may need a different investigation from one with original hardware. Likewise, a support that has lost its label cannot be identified reliably simply by the model badge. A workshop's inspection can clarify what needs replacing and what must be checked before the new pair is installed.
Avoid describing a gas-strut purchase as a performance upgrade unless a verified application has been designed and specified for that purpose. The objective here is appropriate bonnet support for the existing vehicle. Ask the installer to assess any modification rather than improvise a higher-force option. This keeps the purchase tied to a practical repair requirement and avoids creating new uncertainty around the bonnet and its mounting points.
Plan installation and acceptance checks
Agree with the installer who will verify the part before fitting and what happens if it differs from the confirmed specification. Keep the pair together with its order information so that both units can be checked. If the packaging or a support is damaged in transit, photograph it and contact the supplier before installation. Do not attempt to straighten, repaint or modify a damaged component to make it usable.
Ask the workshop to use the applicable fitting instructions and assess the bonnet's operation after the job. The final check should address the original complaint and confirm that the vehicle can be handed back in an appropriate condition. This guide does not prescribe a universal mounting orientation or a clipping technique for every Commodore listed in the title. The original vehicle arrangement and the correct replacement instructions govern the work.
Keep the invoice and any written specification confirmation. If there is a concern after fitting, describe the actual behaviour and ask the installer to inspect it rather than repeatedly experimenting with the bonnet. A short video taken safely by the workshop may help communicate a problem, but it is not a substitute for inspection. The purpose of the paperwork is to make a subsequent enquiry specific and useful.
Melbourne availability and Australian delivery
RunningRoo's local service can be useful when a Commodore is already booked into a Melbourne workshop. Arrange pickup in Blackburn by appointment and confirm the order is ready before travelling. If the fitter will collect the pair, coordinate the order reference and appointment so that there is no confusion about which vehicle the parts are for. Local collection should follow, rather than replace, the compatibility check.
For customers elsewhere in Australia, ask about fast dispatch for confirmed available stock and provide the delivery postcode. Avoid planning around a promised arrival date that has not been confirmed for the actual service. Check the current shipping and returns terms on the platform used to place the order. Save the item description and supplier's fitment response with the order confirmation for easy reference.
A useful message is: “I need a pair of bonnet supports for this specific Commodore model and body style. The bonnet is original, or these modifications are present. Here are the VIN and old support markings. Please confirm the pair, any supplied fittings and current dispatch or pickup availability.” RunningRoo's friendly Australian-operated team can work from those details. Call 0425 890 125 if the specification is still unclear.
Getting value from the repair
A sensible comparison includes the parts, any additional hardware, installation and the inconvenience of an unsuitable order. That does not mean automatically replacing every nearby item. It means asking the workshop to identify the necessary scope before spending money. If there is a mounting problem or an altered bonnet, resolve the specification question before choosing a pair based on a familiar-looking photograph.
For an older car used every day, organising the order and workshop visit together can be more valuable than chasing a small difference between online prices. Confirm the pair while the vehicle information is available, retain the evidence and allow the installer to inspect it before fitting. This straightforward process keeps the purchase focused on a usable, correctly specified repair rather than a broad search result.
Frequently asked questions
Does the offer contain two bonnet struts?
The current product title says Pair Bonnet Gas Struts. Confirm that one purchased package contains the two supports required and ask about any additional fittings. The title does not establish a complete fitting-hardware kit. Keep the quantity clear when comparing it with offers that may be priced for a single support.
Will these fit every VT, VX, VY, VZ or VU?
Do not assume universal compatibility from the broad title. Provide the VIN, model, body style and original support details, and disclose any bonnet or mounting changes. RunningRoo and your installer should confirm the specific application. Related model names in a catalogue are a starting point for checking, not a replacement for it.
Are these also suitable for a wagon tailgate?
This article concerns the listed bonnet-support pair. Do not apply its fitment to a tailgate or boot lid. Tell the supplier which panel needs support and request the appropriate product for that application. A similar shape or attachment style is not sufficient evidence that a different panel uses the same specification.
Can I replace only the weaker support?
Stabilus's general selection guidance recommends replacing both where a pair is used. Discuss the actual vehicle and condition with the installer. The RunningRoo offer is a pair, so compare its package on that basis. This recommendation does not establish the supplied brand or prove that the pair fits a modified bonnet.
Is a higher force rating always better?
No. The support must be matched to the actual application. Ask for the appropriate specification using the original markings and vehicle details rather than selecting the highest number. If the bonnet has been changed, have the altered arrangement assessed. This article does not provide an unverified force figure for the RunningRoo product.
How can I order locally or arrange delivery?
Review Holden Commodore VT VZ bonnet struts Australia at RunningRoo or the matching RunningRoo eBay listing and call 0425 890 125 with the fitment details. RunningRoo offers friendly Australian-operated support, Melbourne local pickup in Blackburn by appointment and fast dispatch options for confirmed stock. Confirm the current price, package and fulfilment arrangement before booking the installation or travelling to collect the pair.
Sources and evidence boundaries
Stabilus: gas spring handling; Stabilus: universal specification guide. Manufacturer information supports only the limited context described above. Retail contents and application leads come from the linked seller offers and are not independent OEM certification. Use the applicable complete service information for the actual vehicle and repair.
Review the RunningRoo product and the corresponding eBay offer, or call 0425 890 125. Contact RunningRoo with VIN, engine code and OE details for friendly Australian-operated support. Ask about Melbourne local pickup in Blackburn by appointment and fast dispatch for confirmed available stock; confirm item-specific fulfilment before booking labour.

