Chrysler 300C TPMS 56053031AB Australia — RunningRoo buying guide

Chrysler 300C TPMS 56053031AB Australia: Four-Sensor Set and 433 MHz Checks

Buying a Chrysler 300C TPMS set in Australia

A tyre-pressure warning can send a Chrysler owner in two different directions: checking the tyre itself or looking for an electronic sensor. Those are related tasks, but they are not the same purchase decision. Before ordering a set of sensors, have the tyre pressures and the monitoring-system complaint assessed by a qualified tyre workshop. This guide is about identifying RunningRoo's four-sensor offer associated with 56053031AB, not promising that four replacement sensors will clear every tyre-pressure warning.

4X For Chrysler 300C TPMS Tyre Sensors 56053031AB 56053031AD 68001698AB
Retailer product photograph. Confirm current supplied contents and fitment with RunningRoo; the editorial cover is an illustration.

The verified product page describes four TPMS sensors, a listed radio frequency of 433 MHz, and reference numbers including 56053031AB, 56053031AD, 68001698AB and 68001744AA. It names selected 2005–2006 Chrysler 300C and Jeep applications. These are retailer application claims that must be checked against the VIN and the vehicle's actual system. Do not extend them to every Chrysler 300, every 300C year or every vehicle that happens to use 433 MHz equipment.

Check the Chrysler 300C TPMS 56053031AB Australia — RunningRoo product page and the corresponding RunningRoo eBay listing. For friendly fitment support, call 0425 890 125. Send your VIN, engine code and known OE reference before ordering. RunningRoo is Australian-operated in Blackburn, Melbourne, with local pickup by appointment and fast dispatch for confirmed stock; confirm availability and timing with the team.

Start with the tyre, then identify the system

Mopar's official owner information describes TPMS as a tyre-pressure monitoring system using wheel-mounted sensors in relevant applications. It distinguishes tyre-pressure information from system-service messages. The official manual for the exact vehicle remains the authority for the displayed warning, required pressures and learning procedure. A later Chrysler manual can explain the general concept, but it does not prove that this early-application sensor set fits a later car or follows the same service routine. Mopar: 2023 Chrysler 300 owner manual, TPMS background only

Tell the tyre workshop exactly what you see: an illuminated warning, a missing pressure reading, a displayed message or a problem that began after tyre or wheel work. Take a photo of the display while the vehicle is safely parked. Keep the wording intact. Saying “the TPMS is broken” is less useful than recording which readings are missing and when the complaint appeared. The technician can then choose appropriate checks instead of starting from a customer-selected replacement part.

An inflation issue should be dealt with as an inflation issue. A purchase of electronics does not repair a tyre or establish that it is safe to continue driving. Follow the handbook and the tyre professional's assessment. This article does not provide a universal pressure figure for the 300C, because tyre size, load and vehicle specification belong in that decision. Use the correct vehicle information rather than the maximum figure on a tyre sidewall or a pressure quoted in another owner's post.

Why a 433 MHz label is not the whole fitment check

The product's listed frequency is one useful identification field. It is not a complete compatibility certificate. For a practical enquiry, supply the VIN, model year, market specification and the full reference from the existing sensor or a workshop scan. Ask the tyre specialist to confirm the replacement's compatibility with the installed system, including whatever identification or learning process the vehicle requires. That is a purchasing safeguard rather than a claim about the programming status of this particular retail set.

Avoid relying on the number of sensors alone. Four units in a box tells you the purchase quantity; it does not establish whether the vehicle uses the same component, whether an additional wheel is monitored or whether a service kit is included. Write down what the workshop has requested. If the request is for four road-wheel sensors, keep that distinction in the order. Do not assume that a four-piece offer includes an unlisted spare-wheel component or covers every wheel configuration.

The word “programmed” also needs a specific meaning. Ask whether the supplied sensors have any preparation already completed and what the installer must do on the vehicle. Do not interpret a seller title, a frequency label or a generic compatibility tick as a promise of automatic recognition. Get the required workshop process confirmed before arranging tyre removal. This avoids discovering at the appointment that the necessary tool, information or service time has not been allowed for.

Match the references without losing the suffix

The letters at the end of a reference are worth preserving. Send 56053031AB as a complete string if that is the number identified for your vehicle. If another source gives 56053031AD or 68001698AB, explain where that number came from. It may be a catalogue reference, an old component marking or the workshop's requested replacement. This guide does not certify a supersession chain between all the numbers listed by the retailer.

A clear photograph of the existing unit's markings can be useful if a technician already has the tyre off. Do not arrange unnecessary dismantling just to obtain an online shopping photograph. The workshop may be able to identify what is needed using suitable equipment and vehicle information. Let it decide the appropriate method. The important point is to provide evidence that belongs to your car, rather than borrowing a photograph from an apparently similar listing.

Cars with changed wheels need an especially clear enquiry. Explain whether the wheels are original, aftermarket, a second set or of unknown origin. Give the tyre workshop that information before it confirms the repair plan. A vehicle name identifies the car, while the actual wheel and valve arrangement may still need inspection. The supplier should not be asked to infer those details from a distant photograph of the whole vehicle.

Four-sensor purchase checklist

Item to confirm Information for the enquiry What not to assume
Vehicle VIN, model year and Australian or import specification Every Chrysler 300C uses the same sensor
Reference Full existing or requested OE number Similar suffixes are automatically interchangeable
Frequency Confirm the vehicle requirement against the listed 433 MHz offer Frequency alone proves fitment
Quantity Four sensors are advertised A fifth sensor or separate service parts are included
Wheel arrangement Original or changed wheels and workshop findings The vehicle name describes the current valve setup
Installation plan Tyre service, identification and any required learning A new sensor will always be recognised without work
Fault evidence Exact message and technician's diagnosis Every warning means all four sensors have failed

Use this checklist when comparing the RunningRoo website with the corresponding eBay item. They provide two genuine buying routes, but the current checkout terms should be read on the route you choose. If a description differs in a detail important to the repair, ask for clarification rather than combining the most favourable statements from both pages. Confirm the actual supplied contents and required installation work in one coherent order.

Should you replace one sensor or buy a set?

That decision should follow the workshop's findings and your maintenance plan. The selected offer is a four-piece set, but the existence of a set does not mean every vehicle needs four replacements. Ask which units have been tested and why the proposed quantity is appropriate. If one sensor has been identified as the problem, discuss the available purchasing options and installation costs instead of assuming that replacing everything is the only reasonable route.

Conversely, an owner planning work on all four road wheels may want a single coordinated parts order. In that situation, ask the workshop to confirm the intended set, the work included and the verification it will perform. Keep the discussion concrete: the vehicle, the wheels, the required parts and the booking. Avoid using online claims about universal battery life or an inevitable failure date to justify replacement. This article does not predict how long any individual sensor will last.

Budget for the service, not just the boxed components. Ask for a clear quote covering the relevant tyre work, fitting and any required electronic procedure. Compare that quote with the same scope if another workshop offers a different price. An inexpensive component order is not necessarily the cheapest completed repair if the wrong version creates a second appointment. A short fitment conversation before purchase can be more valuable than rushing to meet an unconfirmed booking.

Local support and Australian delivery planning

Prefer Melbourne local pickup? RunningRoo Auto Parts is Australian-operated in Blackburn, VIC. Contact the team before travelling so the correct part and an appointment can be arranged. For delivery elsewhere in Australia, ask about fast dispatch of confirmed stock and the delivery estimate for your postcode. Friendly support is available on 0425 890 125 or through the RunningRoo contact page. Keep your VIN, engine code, OE number where available, and workshop diagnosis with the enquiry so the order matches the identified repair.

If you are collecting in Melbourne, arrange the Blackburn pickup after the application and stock are confirmed. Bring the order reference and tell the workshop when the parts will be available. If the car is already booked for tyre work, agree who will supply any additional service components. Keeping supplier and installer responsibilities clear helps avoid a booking where the sensors are present but the rest of the agreed job is not ready.

For delivery elsewhere in Australia, send the postcode and ask about current dispatch arrangements. Fast dispatch is useful, but it should not be confused with a guaranteed arrival time at every destination. Confirm timing before committing to a workshop slot that depends on the parcel. If you are preparing a second set of wheels, label the order and workshop paperwork accordingly so the application does not become mixed with a different vehicle or wheel set.

Check the Chrysler 300C TPMS 56053031AB Australia — RunningRoo product page and the corresponding RunningRoo eBay listing. For friendly fitment support, call 0425 890 125. Send your VIN, engine code and known OE reference before ordering. RunningRoo is Australian-operated in Blackburn, Melbourne, with local pickup by appointment and fast dispatch for confirmed stock; confirm availability and timing with the team.

What to record after fitting

Ask the tyre specialist to record the work performed and the outcome of the vehicle-specific checks. Keep the invoice, the component references and any identification information the workshop provides. If a warning later returns, that record helps explain what was fitted and what was verified at the time. It is more useful than a memory that “the tyre sensors were changed sometime last year”.

Do not treat clearing a message as proof of a completed repair unless the installer has carried out the required checks. Equally, do not keep purchasing sensors if a warning remains without returning to the diagnostic process. Tell the technician whether the displayed behaviour is unchanged or different and whether the wheels have been moved or serviced since the repair. A clear history lets the workshop assess the current problem on its own evidence.

Keep the tyre-pressure maintenance routine described in your handbook after the sensor work. Monitoring equipment is part of the vehicle's system, not a reason to stop checking the tyres. The buying guide and product links help source the components; the handbook and tyre professional guide their use and service. That division keeps the article useful without pretending to replace model-specific instructions.

Frequently asked questions

Is this a four-piece set?

Yes. The selected RunningRoo product is advertised as four TPMS sensors. Confirm the current package before checkout and ask about any separately required service components. Do not assume that a fifth wheel sensor or all fitting consumables are part of the offer simply because four sensors are pictured.

Does 433 MHz mean it fits my Chrysler?

No. Treat the listed frequency as one field in the fitment check. The VIN, full part reference, system specification and workshop service requirements still matter. Ask the tyre specialist and RunningRoo to confirm the intended application rather than selecting a sensor by frequency alone.

Will it fit a later-model 300C?

This article does not make that claim. The verified listing names selected early applications, including 2005–2006 Chrysler 300C. A later vehicle requires its own VIN-based confirmation. General TPMS information in a later official manual is not an interchange approval for this early-application retail set.

Will the sensors learn automatically?

Do not assume that. Confirm the actual supplied sensor configuration and the vehicle-specific procedure with the installer before buying. This guide does not promise pre-programming, cloning or automatic registration. The workshop should allow for the correct process and the equipment required for your vehicle.

Can a new sensor fix a puncture warning?

A replacement electronic component does not repair a damaged tyre. Have the pressures and tyre condition checked and let the workshop distinguish an inflation problem from a monitoring-system issue. Follow the vehicle handbook and professional advice before driving with a warning or an unresolved tyre concern.

Where can I get help in Melbourne?

Contact RunningRoo on 0425 890 125 with the VIN, OE reference and workshop request. Melbourne local pickup is available in Blackburn VIC by appointment. The Australian-operated team can assist with the product enquiry, while your tyre specialist confirms installation requirements and the vehicle's final operation.

Order the set that matches the service plan

For a Chrysler 300C TPMS purchase, the strongest starting point is a confirmed reference and a clear workshop plan. RunningRoo's four-sensor 433 MHz offer is a real product option, but it should be selected on verified compatibility rather than a broad model label. Use the links below, keep the complete part number in the enquiry and confirm the fitting arrangements before checkout.

Check the Chrysler 300C TPMS 56053031AB Australia — RunningRoo product page and the corresponding RunningRoo eBay listing. For friendly fitment support, call 0425 890 125. Send your VIN, engine code and known OE reference before ordering. RunningRoo is Australian-operated in Blackburn, Melbourne, with local pickup by appointment and fast dispatch for confirmed stock; confirm availability and timing with the team.

Related RunningRoo reading

TPMS Sensor Buying Guide for Australian Ford, Holden, Hyundai and Chrysler. This is supplementary reading about a separate component or broader topic, not evidence of interchangeability.

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top